Operation Manual,Oxygen Cooling Tower,Tower Structure

UNIVERSAL INDUSTRIAL PLANTS MFG.. CO IMPIANTI LIQUEFAZION E PRODUZIONE GAS TECNICI
	ISO 9001:2000 Certified

OPERATOR’S MANUAL

MANUAL OF
OXYGEN/NITROGEN PLANT

E-mail: oxygen@universalboschi.com ; oxygenub@vsnl.net
Website: www.oxygen plants.com com; www.air separation plants.com

PREFACE

The purpose of this manual is to provide the owner with the necessary instruction to properly operate and maintain the oxygen gas plant of capacity 80 cubic meter per hour.

It is the responsibility of the owner to thoroughly review the instructions contained herein and to become acquainted with the methods of operation and maintenance suggested.sss

Should questions arise concerning the working of the plant feel free to contact us.ss

UNDERTAKING AS TO SAFETY

We have ensured that our equipment is safe and without risk tothe health of the workers when properly used in accordance with the information and advice relating to its use contained inthe Instruction Book/Operator’s Manual. It will be, therefore, ofutmost importance that you use our equipment only after goingthrough the Book/Manual thoroughly, which has detailedinstructions, information and advice for the safety of operators and workers in your factory.

The equipment is sold and supplied to you on the basis of your express undertaking that you will take the steps specified in the Book/ Manual in order to ensure that the equipment sold and supplied by us will be safe and without risk to the health of your works when properly used.

METRIIC CONVERSION EQUIPMENTS

U.S. TO METRIC

The metric conversion equipments listed below represent the more commonly used measuring units in the engine.

Multiply	By	To obtain
Inches (in)	25.4	millimeters (mm)
Pounds (lbs)	0.454	kilograms (kg)
Gallons (gals)	3.785	liters (l)
Horsepower (hp)	0.746	kilowatts (kw)
British Thermal Units (BTU)	1055	joules (J)
Degrees Fahrenheit (°F)	0.556 (°F-32)	degrees Celsius (°C)
Pounds per square inch (psi)	0.0703 ,6.895 ,0.069	kilograms per square Kilopascal (kPa) bar
Cubic feet per minute (cfm)	0.0283	cubic meters per Minute (1/min)
Gallons per minute (gpm)	3.785	liters per minute (l/min)
Torque in foot-pounds (ft-lbs)	1.356	Newton meters (N.m)
Saybolt Universal Viscosity (SSU)	0.138	kilogram meters (kg-m)
Less than 100 seconds	0.226 SSU-195/SSU	Kinematic viscosity (CS)
Greater than 100 seconds	0.22 SSU-135/SSU	Kinematicviscosity (CS)